Optima AUC - Absorbance, Interference

Optima AUC - Absorbance, Interference

Product no. B86437

Learn more about this product on Beckman.com
Optima AUC - Absorbance, Interference
PlatformAnalytical
Maximum Speed60,000 RPM
Maximum g-Force290,000 xg
Acceleration5-400 rpm/second (above 500 rpm), 400 max acceleration
Deceleration5-400 rpm/second (above 500 rpm), 400 (max deceleration)
Timed Run1 to 999 hrs, 59 mins (including hold runs)
Max Capacity Volume Range0.1 - .44 mL
Temperature Control0.5|°C of set temperature after equilibration
Drive Type CoolingQuiet drive technology / air cooled
Temperature Range(s)7-40° C (1°C increments at > 25-30°C ambient temp), 4-40°C (1°C increments at <25°C ambient temp)
Zonal CapabilityFalse
Pollution Degree2
Vacuum and PumpBelow 5 microns (0.7 Pa)
Client PC Operating System(s)LINUX
Display15.3" high-resolution color touchscreen
Operating Mode(s)LINUX for remote monitoring, GUI (any OS)
Material(s)Coated Polycarbonate, Polyurethane, Kydex Plastic, Polyurethane Painted Aluminum
FinishRotor pad: Coated polycarbonate, Top & front surfaces: Polyurethane, Other surfaces: Kydex plastic & polyurethane painted aluminum
Weight508.5 kg
Width94.0 cm
Depth68.1 cm
Height125.7 cm
Clearances5.1 cm (sides) & 15.2 cm (rear)
Humidity Restrictions<80% at <30°C (non-condensing)
Power Requirements200-240 VAC, 30 A branch circuit, 50/60 Hz
Optima AUC - Absorbance, Interference
Danaher Logo
© Beckman Coulter, Inc. All rights reserved.

Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES. PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS The listed regulatory status for products correspond to one of the below: IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use." ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagent. Analytical and performance characteristics are not established." CE-IVD, CE: Products intended for in vitro diagnostic use and conforming to the In Vitro Diagnostic Regulation (IVDR) (EU) 2017/746. (Note: Devices may be CE marked to other directives.) RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures." LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only." No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.